www.gusucode.com > simulinktestdemos 工具箱matlab源码程序 > simulinktestdemos/sltestProjectorFanSpeedExampleRequirements.txt

    These detailed requirements correspond to the Simulink Test example model
sltestProjectorFanSpeedExample.slx

Requirements:

1. Projector temperature shall not exceed 65 degrees C.
2. The system parameters shall minimize the time to reach lamp activation temperature.
	2.1. The lamp activates at 45 degrees C.
	2.2. Lamp activation time shall be tested as follows:
		2.2.1. The system shall start at ambient temperature.
		2.2.2. With the fan active, the lamp shall be switched on.
		2.2.3. The activation time is the time to reach 45 deg. C after the lamp switches on.