www.gusucode.com > nncontrol 工具箱 matlab 源码程序 > nncontrol/private/nnpredicthelp_simulation.m
% SIMULATION % % The system can be simulated once the Plant Identification is complete % and the Controller Parameters are set. After you select the Apply buttons in % either window, you can simulate the plant. Go back to the Simulink % window and select Start under the Simulation menu to start the simulation. % If the performance is not satisfactory, you can go back to retrain the plant % or change the controller parameters. % Copyright 1992-2013 The MathWorks, Inc.