www.gusucode.com > 基于lingo求所以解，对潮流计算求出所有解 > matpower4.1/t/t_pf.m
function t_pf(quiet)
%T_PF Tests for power flow solvers.
% MATPOWER
% $Id: t_pf.m,v 1.11 2011/05/17 15:42:07 cvs Exp $
% by Ray Zimmerman, PSERC Cornell
% Copyright (c) 2004-2010 by Power System Engineering Research Center (PSERC)
%
% This file is part of MATPOWER.
% See http://www.pserc.cornell.edu/matpower/ for more info.
%
% MATPOWER is free software: you can redistribute it and/or modify
% it under the terms of the GNU General Public License as published
% by the Free Software Foundation, either version 3 of the License,
% or (at your option) any later version.
%
% MATPOWER is distributed in the hope that it will be useful,
% but WITHOUT ANY WARRANTY; without even the implied warranty of
% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
% GNU General Public License for more details.
%
% You should have received a copy of the GNU General Public License
% along with MATPOWER. If not, see <http://www.gnu.org/licenses/>.
%
% Additional permission under GNU GPL version 3 section 7
%
% If you modify MATPOWER, or any covered work, to interface with
% other modules (such as MATLAB code and MEX-files) available in a
% MATLAB(R) or comparable environment containing parts covered
% under other licensing terms, the licensors of MATPOWER grant
% you additional permission to convey the resulting work.
if nargin < 1
quiet = 0;
end
t_begin(33, quiet);
casefile = 't_case9_pf';
if quiet
verbose = 0;
else
verbose = 1;
end
if have_fcn('octave')
s1 = warning('query', 'Octave:load-file-in-path');
warning('off', 'Octave:load-file-in-path');
end
mpopt = mpoption('OUT_ALL', 0, 'VERBOSE', verbose);
%% define named indices into bus, gen, branch matrices
[PQ, PV, REF, NONE, BUS_I, BUS_TYPE, PD, QD, GS, BS, BUS_AREA, VM, ...
VA, BASE_KV, ZONE, VMAX, VMIN, LAM_P, LAM_Q, MU_VMAX, MU_VMIN] = idx_bus;
[F_BUS, T_BUS, BR_R, BR_X, BR_B, RATE_A, RATE_B, RATE_C, ...
TAP, SHIFT, BR_STATUS, PF, QF, PT, QT, MU_SF, MU_ST, ...
ANGMIN, ANGMAX, MU_ANGMIN, MU_ANGMAX] = idx_brch;
[GEN_BUS, PG, QG, QMAX, QMIN, VG, MBASE, GEN_STATUS, PMAX, PMIN, ...
MU_PMAX, MU_PMIN, MU_QMAX, MU_QMIN, PC1, PC2, QC1MIN, QC1MAX, ...
QC2MIN, QC2MAX, RAMP_AGC, RAMP_10, RAMP_30, RAMP_Q, APF] = idx_gen;
%% get solved AC power flow case from MAT-file
load soln9_pf; %% defines bus_soln, gen_soln, branch_soln
%% run Newton PF
t = 'Newton PF : ';
mpopt = mpoption(mpopt, 'PF_ALG', 1);
[baseMVA, bus, gen, branch, success, et] = runpf(casefile, mpopt);
t_ok(success, [t 'success']);
t_is(bus, bus_soln, 6, [t 'bus']);
t_is(gen, gen_soln, 6, [t 'gen']);
t_is(branch, branch_soln, 6, [t 'branch']);
%% run fast-decoupled PF (XB version)
t = 'Fast Decoupled (XB) PF : ';
mpopt = mpoption(mpopt, 'PF_ALG', 2);
[baseMVA, bus, gen, branch, success, et] = runpf(casefile, mpopt);
t_ok(success, [t 'success']);
t_is(bus, bus_soln, 6, [t 'bus']);
t_is(gen, gen_soln, 6, [t 'gen']);
t_is(branch, branch_soln, 6, [t 'branch']);
%% run fast-decoupled PF (BX version)
t = 'Fast Decoupled (BX) PF : ';
mpopt = mpoption(mpopt, 'PF_ALG', 3);
[baseMVA, bus, gen, branch, success, et] = runpf(casefile, mpopt);
t_ok(success, [t 'success']);
t_is(bus, bus_soln, 6, [t 'bus']);
t_is(gen, gen_soln, 6, [t 'gen']);
t_is(branch, branch_soln, 6, [t 'branch']);
%% run Gauss-Seidel PF
t = 'Gauss-Seidel PF : ';
mpopt = mpoption(mpopt, 'PF_ALG', 4);
[baseMVA, bus, gen, branch, success, et] = runpf(casefile, mpopt);
t_ok(success, [t 'success']);
t_is(bus, bus_soln, 5, [t 'bus']);
t_is(gen, gen_soln, 5, [t 'gen']);
t_is(branch, branch_soln, 5, [t 'branch']);
%% get solved AC power flow case from MAT-file
load soln9_dcpf; %% defines bus_soln, gen_soln, branch_soln
%% run DC PF
t = 'DC PF : ';
[baseMVA, bus, gen, branch, success, et] = rundcpf(casefile, mpopt);
t_ok(success, [t 'success']);
t_is(bus, bus_soln, 6, [t 'bus']);
t_is(gen, gen_soln, 6, [t 'gen']);
t_is(branch, branch_soln, 6, [t 'branch']);
%% check Qg distribution, when Qmin = Qmax
t = 'check Qg : ';
mpopt = mpoption(mpopt, 'PF_ALG', 1, 'VERBOSE', 0);
mpc = loadcase(casefile);
mpc.gen(1, [QMIN QMAX]) = [20 20];
[baseMVA, bus, gen, branch, success, et] = runpf(mpc, mpopt);
t_is(gen(1, QG), 24.07, 2, [t 'single gen, Qmin = Qmax']);
mpc.gen = [mpc.gen(1, :); mpc.gen];
mpc.gen(1, [QMIN QMAX]) = [10 10];
mpc.gen(2, [QMIN QMAX]) = [0 50];
[baseMVA, bus, gen, branch, success, et] = runpf(mpc, mpopt);
t_is(gen(1:2, QG), [10; 14.07], 2, [t '2 gens, Qmin = Qmax for one']);
mpc.gen(1, [QMIN QMAX]) = [10 10];
mpc.gen(2, [QMIN QMAX]) = [-50 -50];
[baseMVA, bus, gen, branch, success, et] = runpf(mpc, mpopt);
t_is(gen(1:2, QG), [12.03; 12.03], 2, [t '2 gens, Qmin = Qmax for both']);
mpc.gen(1, [QMIN QMAX]) = [0 50];
mpc.gen(2, [QMIN QMAX]) = [0 100];
[baseMVA, bus, gen, branch, success, et] = runpf(mpc, mpopt);
t_is(gen(1:2, QG), [8.02; 16.05], 2, [t '2 gens, proportional']);
mpc.gen(1, [QMIN QMAX]) = [-50 0];
mpc.gen(2, [QMIN QMAX]) = [50 150];
[baseMVA, bus, gen, branch, success, et] = runpf(mpc, mpopt);
t_is(gen(1:2, QG), [-50+8.02; 50+16.05], 2, [t '2 gens, proportional']);
%% network with islands
t = 'network w/islands : DC PF : ';
mpc0 = loadcase(casefile);
mpc0.gen(1, PG) = 60;
mpc0.gen(1, [PMIN PMAX QMIN QMAX PG QG]) = mpc0.gen(1, [PMIN PMAX QMIN QMAX PG QG]) / 2;
mpc0.gen = [mpc0.gen(1, :); mpc0.gen];
mpc1 = mpc0;
mpc = mpc0;
nb = size(mpc.bus, 1);
mpc1.bus(:, BUS_I) = mpc1.bus(:, BUS_I) + nb;
mpc1.branch(:, F_BUS) = mpc1.branch(:, F_BUS) + nb;
mpc1.branch(:, T_BUS) = mpc1.branch(:, T_BUS) + nb;
mpc1.gen(:, GEN_BUS) = mpc1.gen(:, GEN_BUS) + nb;
mpc.bus = [mpc.bus; mpc1.bus];
mpc.branch = [mpc.branch; mpc1.branch];
mpc.gen = [mpc.gen; mpc1.gen];
%mpopt = mpoption(mpopt, 'OUT_BUS', 1, 'OUT_GEN', 1, 'OUT_ALL', -1, 'VERBOSE', 2);
mpopt = mpoption(mpopt, 'VERBOSE', verbose);
r = rundcpf(mpc, mpopt);
t_is(r.bus( 1:9, VA), bus_soln(:, VA), 8, [t 'voltage angles 1']);
t_is(r.bus(10:18, VA), bus_soln(:, VA), 8, [t 'voltage angles 2']);
Pg = [gen_soln(1, PG)-30; 30; gen_soln(2:3, PG)];
t_is(r.gen(1:4, PG), Pg, 8, [t 'active power generation 1']);
t_is(r.gen(5:8, PG), Pg, 8, [t 'active power generation 1']);
t = 'network w/islands : AC PF : ';
%% get solved AC power flow case from MAT-file
load soln9_pf; %% defines bus_soln, gen_soln, branch_soln
r = runpf(mpc, mpopt);
t_is(r.bus( 1:9, VA), bus_soln(:, VA), 8, [t 'voltage angles 1']);
t_is(r.bus(10:18, VA), bus_soln(:, VA), 8, [t 'voltage angles 2']);
Pg = [gen_soln(1, PG)-30; 30; gen_soln(2:3, PG)];
t_is(r.gen(1:4, PG), Pg, 8, [t 'active power generation 1']);
t_is(r.gen(5:8, PG), Pg, 8, [t 'active power generation 1']);
if have_fcn('octave')
warning(s1.state, 'Octave:load-file-in-path');
end
t_end;